Electronic controller for control,
start and stop of diesel, to gasoline and generators
To start/stop by external order, conditional stop, oil pressure switch or battery charge (petrol), and safety features such as levels, pressure switches, cylinder head temperature, etc.
Three for starting, stopping and engine contact.
Three others that can adopt one of the following seven combinations of outputs:
- Fertilizer, Electric pump, Fault indication.
- Fertilizer, Preheating, Fault indication.
- Fertilizer, Electro pump, Preheating.
- Preheating, Electric pump, Indication of fault.
- Sector 1, Sector 2, Electric pump.
- Sector 1, Sector 2, Fault indication.
- Sector 1, Sector 2, Preheating.
The duration of the preheating.
The starting time.
The number of start attempts.
The time between start attempts.
The duration of the stop command.
The delay between the effective start of the engine and the start of the electric pump.
The delay between the stop of the electric pump and the stop of the engine.
The post-irrigation time.
Delays in actions due to fault detection and external start/stop commands.
Input 1 used as Start or as Start/Stop.
Relating a schedule to input 1 (e.g. to start by schedule and level).
On-screen information is available on the time clock, fault or conditional stop situation and engine operating hours.
There are five schedules of activation, with programming of the frequency of the days of irrigation, the hour of beginning and the duration of the activation.
Power supply of the controller at 12 Vdc, with very low consumption.
Optocoupled inputs and relay outputs.